Nice. But…
I received my table via FedEx freight. I received a call a week earlier from them scheduling the palletized drop off. It was a bit strange to see it metal-straped to a pallet. It wasn’t remotely heavy or large in dimension. The assembly is relatively straightforward, though I did install the plastic peg feet instead of the wheels thinking they were part of the assembly instead of an option. Finally, my main issue is with the Quality Control. My table has a big goop of caulk or something underneath, as well as strange coatings on the corners that required some sort of scouring pad(blue) which results in scratches. The two main surfaces, the top and the shelf, come with a protective layer that must be peeled away, which was so good at its job that it took longer that I though to remove it. Also, as a minor note, the hollow leg-tubes are relatively thin and each was slightly out of round but doesn’t hinder assembly or affect aesthetics. Once assembled and cleaned with stailess cleaner, it looked good enough to store my VP215 on. To that end, the size is perfect, with a few inches all around to spare, and the wheels seem high quality and a softer rubber, perfect for most flooring. Overall this table seems well built, and I have no doubt that it will hold up very well over the years. I would recommend for an equipment table. But given the mystery coating that had to be essentially scratched off with no documentation to advise, I would be hesitant to use for food. For my purposes, it’s a “thumbs-up”!
